NorthVision Wireless Presentation System

Pictured above is the NorthVision Wireless Presentation System's Receiver on the left, and the Wireless Transmitter on the right.

The NorthVision Wireless Presentation System allows users to wirelessly share their screen just by plugging in the Wireless Transmitter.

Using the NorthVision Wireless Presentation System

NorthVision is very similar to Barco Clickshare, however the dongle for NorthVision will require charging.

1. Switch on the Receiver by pressing the power button circled in red
   
   1. After the Receiver is switched on, a red light will appear to indicate it is switched on
      
   2. After the Wireless Transmitter is paired, it will turn blue
      
   3. After you start sharing your screen, it will turn green
       
2. Connect the Wireless Transmitter to your Presentation Device (Laptop) via USB
   1. After the Wireless Transmitter is connected, its light will turn red and it will attempt to pair with the Receiver
      
   2. Once the Wireless Transmitter is paired to the Receiver, the light will turn blue. It is now ready for Screen Sharing
      
   3. Press the black button with the NorthVision logo on it to share your screen. The light will turn green if it is successful.
      
3. To stop sharing your screen, press the black button while your screen is still being shared, or unplug the Wireless Transmitter from your device

Charging the NorthVision Wireless Transmitter

As the Wireless Transmitter runs on battery, once its battery is depleted, you will no longer be able to share your screen. 

If you noticed that the dongle no longer has battery, please connect the USB charging cable to your laptop.

You can check that the Wireless Transmitter is charging by looking at the battery indicator circled in red. If it is charging, the indicator lights will blink. The battery indicator will also show how much battery is remaining.